Classification list
Metal carved composite board
  • Metal carved composite board
  • Message
    Details

    外墙金属雕花板

    Several misunderstandings about buying metal carved composite panels

     

    The metal-carved composite panel has both practical performance and decorative performance. The quality is not good enough to be redone. The style selection is difficult to save, and the symmetrical outer wall panel can be selected once and for all. Regarding the misunderstanding of the purchase and paving of metal carved composite panels, the owners should pay attention to it! Misunderstanding

    The same style, choose cheap

    Many consumers are prone to a misunderstanding when purchasing exterior wall panels. It is clearly a metal-carved composite panel with the same style. Small shops sell 10 pieces, and brand stores sell dozens or even hundreds of yuan. Brand stores are pit people, but do not know the quality of brand stores and after-sales are better. I only pick cheap ones and don't look at the quality. After the paving is finished, I often regret it late.

    Misunderstanding 2

    The thicker the brick, the stronger it is.

    The quality of a metal-engraved composite panel does not depend on the thickness, but on its wear resistance and hardness. The bricks are too thick and the difficulty of paving is increased.

    Misunderstanding three

    Seamless paving can really be seamless

    The outer wall of the villa is affected by the expansion and contraction of the heat, and it is necessary to leave the seam to avoid problems such as empty drums and curling angles. The seamless bricks mentioned in the shop or the shopping guide (the interval between 1-1.5mm) are because the quality of the brick is good, the flatness is higher, and the seam is smaller than the ordinary brick, and the overall paving effect is also more. Ok, but the seams have to stay.

    Misunderstanding four

    The exterior of the villa can be cleaned with a strong acid cleaner

    When cleaning bricks, if you clean with a strong acid cleaner, you can quickly remove the stains, but it will also corrode and destroy the glaze layer on the brick surface and the pattern on the surface of the exterior wall tiles. After a long time, the bricks will become dull. Light. Do not think that the exterior wall tiles of the villa are very strong. When cleaning, try to clean them with professional detergent.


    外墙金属雕花板

    外墙金属雕花板

    弹涂纹.jpg

    上一篇:Metalengravedboardproduction...
    下一篇:Integratedexteriormetalcarvedp...

    分享到