Quality Assurance Measures for Construction of Metal Exterior Wall Decorative Panels

Our company is specialized in the production of exterior wall insulation board, metal carved insulation board, metal decorative insulation board. The company has developed a variety of color, metal insulation board of various specifications. In the metal exterior wall decoration panel project, the guarantee measures for construction quality are collected as follows:

Quality Assurance Measures for Construction of Metal Exterior Wall Decorative Panels

1. For the extruded board, check the factory certificate and test report before construction. And use the box ruler to measure its size.

2. Check the factory certificate and test report of crack-resistant polymer mortar steel wire mesh.

3. When installing the anchor, when punching the extruded board with the impact drill, do not use too much force to avoid damaging the extruded board.

4. When installing the anode insulation board, leave a 10-20mm gap between the corners of the cement pad.

5. When smashing the anti-cracking polymer mortar, the work should be closely coordinated, and the process should be arranged reasonably. It is strictly forbidden to reverse the operation.

6. When plastering, the wall surface, yin and yang angle should be suspended in time, and the finished product protection should be done.

7. When installing the drip tank, level it according to the line, clean it in time, and check it at any time.

8. Calculate the geometrical dimensions of each section of the outer wall and the extruded panel. After the extruded board is assembled, the actual size should be 10-20 mm larger than the calculated size (5-10 mm on each side).